C&K systems System 236i Installation Manual download pdf (Page 8)

SYSTEM 236 Installation Manual

STAR (Shift)

to other values or functions. Press and release the key first.

On some keypads, this key is labelled .

SPECIAL FUNCTION KEYS

The Alpha II keypad also has special function keys available during

programming. The function of each key is outlined below:

The star (*) key is used as a SHIFT key, and

allows you to shift the 1, 2, 3, 4, 5, and 0 keys

This key may be labelled on some keypads.

POUND (Enter)

The pound (#) key is used like the ENTER key on a

computer. It signals that you are finished entering data.

MOVE CURSOR RIGHT ( )

During programming, a combination of the STAR

(*) key and the EMERGENCY (E) key is used to

move the cursor one space to the right. The data which is passed over is

not changed. The EMERGENCY key may be labelled on some

keypads. If your keypad has this symbol, remove the key and replace it

with one of the blank keys provided.

MOVE CURSOR LEFT ( )

A combination of the STAR (*) and the POLICE

(P) key is used to move the cursor one space to

the left. The data which is passed over is not changed. This key may

ERASE

A combination of the POLICE (P) key and the [9]

key is used as the erase key. It erases the program

value at the cursor position, then moves the cursor

one position to the right.

The BYPASS key is used to scroll through the messages

and zone locations for keypad programming. To scroll

backwards, press the STAR (*) key followed by the

[BYPASS] key.

SCROLL

To Exit Alpha Keypad Programming

When you have finished programming, press [*] [#].

The keypad will

also exit the programming mode if you do not press any key within

a five minute period.

be shown with the symbol on some keypads.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

No comments

C&K systems System 236i Installation Manual Page 8